Ken, yes it apparently it was in a shed Couldn't figure why the park brake was so noisy and loose, rubber accessories in floor to master res. was held in by dirt, res. access cover was rusted in place, apparently the hydraulic brakes were not used for at least the last 10 years or so, no need to do much stopping between harvest and elevator in North Dakota. Not much evidence of grease in being used.

Need to get 400 series front axle for P-30 spindles.

Ed

'37 GMC T-18 w/ DD 4-53T, RTO-610, 6231 aux., '95 GMC running gear, full disc brakes, power steering, 22.5 wheels and tires.
'47 GMC 1 ton w/ 302, NP-540, 4wd, full width Blazer front axle.
'54 GMC 630 w/ 503 gasser, 5 speed, ex fire truck, shortened WB 4', install 8' bed.
'55 GMC 370 w/270, 420 4 speed, grain, dump bed truck from ND. Works OK.