Olezippi - I want to make it safe and comfortable but not a trailer queen. I want to be able to drive it around town and not worry about scratches, etc.

Justhorsen - I'm going to end up replacing the majority of the fasteners because of the amount of rust on them. Even after soaking with lots of WD-40, ended snapping almost all of the fasteners in the bed and rear fenders. The front fenders came off a lot easier and I only broke off a few of them. The driver's side front pillar down to the bottom of the cab has a lot of rust so that will need to be replaced.

sstock - I decided to take it down to the frame to see what condition the chassis is in, right now it has a lot of surface rust but I haven't found any weak spots in the chassis, so hopefully I can re-use the chassis. I'll be a doing a lot of reading in the forums to try to decide the best options.

Tuts - She is all there and not too much rust from what I've found so far. The interior is going to take a lot of work though after being the home to various creatures.

Thanks guys,
Rob


1951 Chevrolet 3100