"If you have the proper tools, its no big deal. But be prepared for busted knuckles."
Good morning Marty. Like you I found it to be "no big deal" but without the "busted knuckles". On my '36 the holes in the axle were enlarged in addition to the bushings in the spindles being loose. Back when I did the job (1960s) parts were still plentiful for the '36 and I found some oversize kingpins. I used my adjustable reamer set to correct the holes in the axle to a light press fit and used the same adjustable reamer set to get a proper fit in the new spindle bushings I installed.
It's all still good 55 years later.
Ray W
