December 19, 2019.

I removed the Glove box door, inner heater box, heater controls, the old ignition switch, and found the missing wiper switch.
The inner heater box was full of mouse nest, and the little buggers chewed a hole in the outer housing to gain access. One of the heater control cables is broken.
I had to break the old ignition switch bezel to remove it ( I have a new one ).
I have the dash board pretty much stripped of every thing (except the light switch). I'll get it sanded and ready for paint when I decide what color to apply to the interior.
I sanded the hood and tossed on a protective coat of paint. There are a couple of light dings that I'll need to deal with later.

I started installing the right side wheel house, then noticed that there is a bunch of missing metal on the radiator support. Apparently the battery acid ate it. Luckily, I have a spare!

Attachments
IMG_4717.JPG (38.46 KB, 279 downloads)
IMG_4595.JPG (35.04 KB, 277 downloads)
IMG_4728.JPG (33.11 KB, 270 downloads)
IMG_4729.JPG (33.87 KB, 267 downloads)
IMG_4730.JPG (26.16 KB, 268 downloads)

Last edited by Rusty Rod; 12/20/2019 3:15 AM.

Another quality post.
Real Trucks Rattle
HELP! The Paranoids are after me!