The Stovebolt Site Forums The Shop Area Engine Shop Drilling and Tapping a 3/4” hole

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 177 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,113

Posts1,056,619

Members48,450

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Drilling and Tapping a 3/4” hole tom moore #1331724 10/29/2019 11:24 AM
Joined: Jul 2008 Posts: 326 Georgia S SimS 'Bolter
SimS 'Bolter S Joined: Jul 2008 Posts: 326 Georgia	X2 on a plug. I'd look for a small "freeze" plug and tap it in for a more permanent fix. SimS

Entire Thread
Subject	Posted By	Posted
Drilling and Tapping a 3/4” hole	tom moore	10/28/2019 1:20 AM
Re: Drilling and Tapping a 3/4” hole	klhansen	10/28/2019 2:05 AM
Re: Drilling and Tapping a 3/4” hole	Joe H	10/28/2019 2:15 PM
Re: Drilling and Tapping a 3/4” hole	tom moore	10/28/2019 5:01 PM
Re: Drilling and Tapping a 3/4” hole	tom moore	10/28/2019 5:15 PM
Re: Drilling and Tapping a 3/4” hole	klhansen	10/28/2019 7:27 PM
Re: Drilling and Tapping a 3/4” hole	SimS	10/29/2019 11:24 AM
Re: Drilling and Tapping a 3/4” hole	tom moore	10/29/2019 12:58 PM
Re: Drilling and Tapping a 3/4” hole	Hotrod Lincoln	10/29/2019 2:47 PM
Re: Drilling and Tapping a 3/4” hole	tom moore	10/29/2019 9:11 PM
Re: Drilling and Tapping a 3/4” hole	Hotrod Lincoln	10/29/2019 10:22 PM
Re: Drilling and Tapping a 3/4” hole	Phak1	10/29/2019 11:06 PM
Re: Drilling and Tapping a 3/4” hole	klhansen	10/29/2019 11:55 PM
Re: Drilling and Tapping a 3/4” hole	52Carl	10/30/2019 1:22 AM
Re: Drilling and Tapping a 3/4” hole	Hotrod Lincoln	10/30/2019 1:29 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard