As Fox says: what is your tool situation? Here are home made mounts to fit a sbc into an MGB. Cut from scrap 3/8 plate, drilled for block mount holes, heated and bent to fit down on the Flathead Ford mount biscuits ($20) and a 3/8 strap welded to the MG frame. Can't get you out any cheaper than this.

[img]https://i.postimg.cc/PNPHZF3m/V8-MGB-009.jpg[/img]

[img]https://i.postimg.cc/MnwgssD3/V8-MGB-008.jpg[/img]


Evan