My original plan was to look for rotor's and calipers from a '73 to '89 chevy truck or van that would fit the stock 66 spindles.Or spindles,rotors and calipers fom a chevy truck or van.My existing set up is 6 lug drum.I want to go 5 lug,with disc's,power steering with a tilt column.Was I on the right track originally?If I was what year of vehicle should I be hunting down for parts?Any suggestions would be appreciated.The Nova clip I'll probably save for my '55 Buick Century,which may be a better candidate for a subframe swap.Anyone that's completed a drum to disc/tilt column swap on a '66 truck or suburban or subframed a '55 Buick with a Nova clip,I welcome your advice on the subject.