Pulling the starter is fairly simple. I would look in the manual to ensure you do it right.
1. Unhook battery.
2. Take a picture of linkage and unhook linkage/wires connected to starter
3. Unbolt the 2 bolts/nuts holding starter in place.
If it is the button on the top, it is just as simple.
1. Unhook battery
2. Unhook linkage
3. Unhook wires
4. Unbolt push button
5. Replace and assemble
If I can do it, anyone can do it.
Chris
Last edited by ndkid275; 07/23/2019 12:38 AM.
