Hello bolters,
I am trying to start my restored 1950 3100. I get no spark at the plugs. Here's what I know:
1) I have blue spark at points.
2) The coil has been tested and is functioning properly.
3) Wires are good and conduct electricity to plugs.
4) Rotor and cap have been replaced - twice.
5) Points gap is set at .022
6) Spark plugs are gapped at .035
7) Nice blue spark on plug when I connect #1 wire to the coil, ground the plug and open the points.I
All the individual components seem to work but when I put it all together - nothing.
Only thing I haven't tried is a new condenser on the distributor. That's next.
I'm running out of ideas!
Any help out there?
Jon
