I have ripped the boards to length and width. I had to square them up with a straight edge and a circular saw before running them through the table saw. I still have to plane them and then rip the strip grooves though.

I also removed spring hangers from a parts truck and removed the bushings and pivots. They were rust welded in place. I had to cut, slice, dice and then press them out. The hanger housings are in ok shape. There was a slight wear on both so I mixed up some JB weld and filled them in. I then hand filed them down to smooth. They should be fine when I get new bushings installed.

Frame: 23
Box: 22
Sheet: 3
Total: 48

🦊😎 A good few nights.

https://photos.app.goo.gl/AieUiBvk8Q7QkZKMA

Next up. Front end removal and then hopefully get back on the C10.

Last edited by Fox; 06/18/2020 2:07 AM.
1970 Chevrolet C10
Grandpa's -- My first truck -- In progress to shiny
Follow the build in the Project Journal
1950 Chevrolet 1-Ton Dually
"Ole Red Girl"
In the Stovebolt Gallery
More pictures here
1951 GMC 9430 1 ton dually--Shiny! | 1972 Chevrolet C20- Rusty- the puzzle box lid for the C10 | 1962 AMC Rambler American- my wife's
Parts trucks-
1951 GMC 9300 | 1951-GMC 9430 | 1951- Chevrolet 1300