Rebuilt the Huck brakes on my 50 Chevy 3100 but have a couple of questions, notice the hold down springs which were on the truck when purchased I tried to replace them with the conical springs and "J" hooks but the hooks were not long enough to go through the backing plate. I ordered a set from a different distributor but they to were short. The truck does not have these springs on the rear and there is no hole on the backing plates for them. After looking at the fronts it seems the springs may interfere with the movement of the shoes during braking? These Hucks are a learning experience. Also notice I used the E Clips sold by Chevs of the 40's after having trouble securing the original clips. Any help appreciated.


[img]https://www.dropbox.com/s/f89twutvrc9bj10/IMG_20190425_141608839_HDR.jpg?dl=0[/img]

Last edited by BobF; 04/30/2019 12:00 AM.