The factory front anti-roll bar for the 67-72 trucks is 1” diameter. I plan to use one on my 63- 1/2T short bed. Vendors sell 1.125” diameter bars with down links to connect to the lower CA. I’m not thrilled with the appearance, but I do have one (yet to be installed).
Tonight I bought a factory 1T truck bar that is 1.25” diameter.
So my question is this, will I regret installing the thicker 1.25” bar from the 1T truck?
Last edited by Lugnutz; 12/13/2018 6:50 PM.
