Going to ask a somewhat stupid question, but I'll ask it anyway....
9+ years ago when I disassembled my engine I bagged and tagged all the parts...after 9+ years, the bags disintegrated and became hard to read. The bolts that mount the bellhousing to a 216 engine...the 4 internal and the 2 exposed. What is the size, grade, length, thread on these?
Also, same information on the bolts for the rear motor mounts to mount to the frame, along with any associated hardware.
I have searched the forum and the manual but can't seem to find the specs for the bolts. I determined the motor mount bolts are 3/8", but want to know what is the right size/grade, and what extra washers are necessary.
