| |
Click on image for the lowdown. 
====
| | |
9 members (MickeyP, Otto Skorzeny, sron48, KCMongo, Nick in Manitou, mick53, Gdads51, Jaison, 1 invisible),
100
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,704 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2011 Posts: 523 Shop Shark | | Shop Shark Joined: Apr 2011 Posts: 523 | The 2 tailgate hinges on my 46 1/2T truck were each held on by a single bolt - the upper bolts had been replaced by a 3/4 inch hole, broken out of the metal. I welded a plate onto the backside of the sheet metal and am about to drill out the mounting holes. Can someone tell me what size (diameter) the mounting bolts should be? 3/8" is a bit tight in the hinge holes, but 5/16" seems a bit loose. Should the bolts holding the bottom sill also all be the same size as the hinge bolts?
Bob
BobS46
| | |
|
|
| |
