The Stovebolt.com Forums

Home | Tech Tips | Gallery | FAQ | Events | Features | Search

Register Log In

The Stovebolt Site Forums The Shop Area Paint and Body Shop What gage metal for patch on floor pan?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

click here to search

New here ??? Where to start?

Click on image for the lowdown.

Where do I go around here?

====

Who's Online Now

2 members (NorthCoast3800, DadsFirstPickup), 53 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,153

Posts1,056,849

Members48,456

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Print Thread

Re: What gage metal for patch on floor pan? #123665 12/20/2006 5:01 PM
Joined: Dec 2006 Posts: 1,154 No.California, Sierra foothill... W WHO, ME ? Shop Shark
WHO, ME ? Shop Shark W Joined: Dec 2006 Posts: 1,154 No.California, Sierra foothill...	Hi, Thanks for the suggestions about the floor patches...and yes you are right, if the rusty part was really bad out it would go. But these are only pin holes and with a new plate on top it should wear for the life of me and the truck. Any other ideas pass them along as my eyes are open! THANKS,Steve

Entire Thread
Subject	Posted By	Posted
What gage metal for patch on floor pan?	WHO, ME ?	12/20/2006 12:34 AM
Re: What gage metal for patch on floor pan?	carolines truck	12/20/2006 12:47 AM
Re: What gage metal for patch on floor pan?	Ghostrider	12/20/2006 1:21 AM
Re: What gage metal for patch on floor pan?	WHO, ME ?	12/20/2006 5:01 PM
Re: What gage metal for patch on floor pan?	tlorber	12/20/2006 8:25 PM
Re: What gage metal for patch on floor pan?	Blake	12/22/2006 1:12 AM
Re: What gage metal for patch on floor pan?	pitbeast	02/15/2007 5:23 AM
Re: What gage metal for patch on floor pan?	Bill_B	02/15/2007 4:58 PM
Re: What gage metal for patch on floor pan?	LeeA	02/16/2007 2:42 AM

Moderated by klhansen

Hop To

Link Copied to Clipboard

Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop

Powered by UBB.threads™ PHP Forum Software 8.0.0