| |
Click on image for the lowdown. 
====
| | |
10 members (mk72, Guitplayer, cmayna, 5 Window 9434, Opelika Tom, TooMany2count, Otto Skorzeny, JW51, Gib70, 1 invisible),
76
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,053 Posts1,055,776 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 122 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 122 | I'm getting ready to try to start the motor after several years. The truck has been inside a heated garage and not exposed to any moisture. I've removed spark plugs and sprayed some oil into cylinders, then turned engine by hand to make sure it's freed up. I've been told to remove distributor and manually turn the oil pump using an extended rod on a drill. My first question is, do I remove valve cover too to make sure oil is being pumped? My next one is which direction should rod be spun, clockwise or counter clockwise?
Engine is a 1960 235 but is now in my 59 Napco.
Any other suggestions or tips?
Thanks in advance for your help.
Brian M | | |
|
|
| |
