The Stovebolt Site Forums The Shop Area Paint and Body Shop How bad should the rust be before I start cutting

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (Southerntruck, 2-Ton, 1 invisible), 78 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,142

Posts1,056,491

Members48,442

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: How bad should the rust be before I start cutting #122516 10/19/2006 3:57 PM
Joined: Aug 2005 Posts: 442 fort worth texas B bluedot38 'Bolter
bluedot38 'Bolter B Joined: Aug 2005 Posts: 442 fort worth texas	try Raybucks.com...dont know any Texas dealers, but raybucks has it, about 14 a quart, and low shipping costs. Mike 1950 Chevy 1/2-ton

Entire Thread
Subject	Posted By	Posted
How bad should the rust be before I start cutting	chev235	10/18/2006 4:01 PM
Re: How bad should the rust be before I start cutting	Anonymous	10/18/2006 4:26 PM
Re: How bad should the rust be before I start cutting	4ontheFloor	10/19/2006 4:54 AM
Re: How bad should the rust be before I start cutting	chev235	10/19/2006 5:03 AM
Re: How bad should the rust be before I start cutting	Anonymous	10/19/2006 1:13 PM
Re: How bad should the rust be before I start cutting	etx44	10/19/2006 2:55 PM
Re: How bad should the rust be before I start cutting	bluedot38	10/19/2006 3:57 PM
Re: How bad should the rust be before I start cutting	4ontheFloor	10/20/2006 12:12 AM
Re: How bad should the rust be before I start cutting	Bill_B	10/27/2006 9:36 PM

Moderated by klhansen

Hop To

Link Copied to Clipboard