| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,181 Posts1,057,151 Members48,464 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2000 Posts: 1,438 'Bolter | | 'Bolter Joined: Aug 2000 Posts: 1,438 | This is what worked for me. As I mentioned, I have a replacement hinge so the hood halves are now attached to the hinge using 10-32 screws. I made a shim out of a small piece of the flat material of a scrap of fender welting and folded it over. It is about .043 thick. Took out the last screw one nearest the hood ornament and shimmed it using the welting cut and punched almost like a washer. The shim is between the hinge and hood half. Looks like it will do the job.
Dennis
40 Chevy 1/2 ton
| | |
|
|
| |
