Hey Bruce, I did the entire inside of my 60 cab by hand using sandpaper and scotch brite pads.

I didnt take my paint of to bare metal, I left as much of the original primer as possible and cleaned that up with tack cloth, several times using new cloth each time.

I applied one thin coat of the wrinkle paint as a base primer and wet sanded that with 400gr paper. I then applied two more coats of wrinkle sanding between these coats with 1000gr wet paper.

I am at that point now and trying to decide if I need a clear coat for protetion from keyring scratches etc.

I used two colors of gray to give me that original custom delux cab look.

I took my time and used lots of tack cloth to keep the dust cleaned up because I wanted to work in a dust free area.

Hobert

"The Lord is my shepherd"