| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,131 Posts1,056,723 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2013 Posts: 863 Shop Shark | | Shop Shark Joined: Jul 2013 Posts: 863 | kevmor99,
I am guessing you are talking about the splash aprons on the side of your truck in front of the rear fenders and behind the cab? Those aprons should bolt directly to the bed sides and running boards. The support brackets do fit to the splash aprons and running boards. You may have to adjust the brackets and aprons to fit properly. I had to do some minor flexing and bending to get my splash aprons to fit on my '49 3100.
I placed some 1/4" diameter stainless steel washers between the running boards and splash aprons more to prevent water from hanging in between the running boards and bottom of the splash aprons. After flexing and bending I was able to get the aprons to fit just where I wanted them. You may have to loosen the running boards a little also and a second set of hands will help a lot. Hope this helps.
Tim
"Pay attention to the details! It ALWAYS pays off."
1949 Chevrolet 3100 Series 1/2 ton Pickup
1964 Chevrolet C10 (Ol' Yella) (SOLD)
1958 Chevrolet Biscayne 2 door (SOLD)
1970 VW Beetle
| | |
|
|
| |
