Ok so I bought a 1950 3100 from Arizona site unseen. It had already been dropped on a 92 s10 chassis with 4.3 tbi. Well needless to say some people should really ask a lot of questions or just not touch/attempt to work on things. They cut so much of the wiring the computer would do nothing but run in limp mode. I just pulled all that out and put 85 intake with a hei and carb. 1000 times better. As far as hammer and dolly for the body well they got the hammer but did not use a dolly it honestly has more sever hammer marks than I can honestly bother to count. the bed was held together with sheet metal screws. etc etc . But got it running and shifting great today. I pulled my first fender to start working it back to shape..