Got a 59 Chevy truck, originally 3sp column changed to 4sp floor shift granny 1st.... Ordered 10" replacement clutch from Napa #1104003....new disk is different than original, 5 springs instead of 6 although pis on their site shows 6, throw out bearing appears identical also original disk casting for the spline is dramatically offset on the side opposite the carrier hub for the springs.not on the new disk.. Are these deal breakers for install? I'm stumbling through this so any help would be greatly appreciated
Last edited by Mazie 59; 10/01/2016 2:25 PM.
