I'm in the process of acquiring a '68 GMC that has no engine. I happen to have a '65 292 with just a few miles on a rebuild. At least that's the story from the guy I bought it from. All I really know for sure is that it has a new paint job so I'm taking the PO's word on the rebuild. I have a few bolt-on goodies that I'm going to put on; offenhauser intake and holly 390 4 bbl, and a stock agri dual exhaust manifold. I'll also change to HEI distrbutor. I've read that there are improvements to be made on the head by polishing, porting and changing to larger valves and there are bigger cams available but I don't have any experience with that stuff so I'm inclined to leave it alone for now. My goal is just to have a dependable truck and hope that it doesn't drink me out of house and home. It came with a S-10 5 speed but I plan to change to a MY06 transmission. Hopefully the OD will help quench the 292's thirst a little, the MY06 should be a little stouter than the T5. Anyway, sorry for the long story but I'm just wondering if anyone can make any suggestions for other improvements I can make before I install this into the truck. I'm not an engine guy so all advice will be appreciated.
Jeff
