I swapped out the front cross member on my 1946.5 Chevrolet 3/4ton with a GMC cross member and dropped a 270 in yesterday. Since it brings it out an inch and a half I'm working through the sheet metal problems, as well as moving the radiator forward. I was wondering if there was anyone here that has done this? Looks like I will need to take some of the radiator support out to bring the hood down. Pushing it forward means the hood is too high. And cut the upper baffle back 2 inches or so. But if there is someone that has done this I would love to talk it over before I cut too much.
Last edited by 1946GMCDAN; 07/03/2016 5:06 AM.
