| |
Click on image for the lowdown. 
====
| | |
0 members (),
89
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,637 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2003 Posts: 343 Member | | Member Joined: Sep 2003 Posts: 343 | The tool you used is called a slide hammer. The usual procedure to fix a dent is:
- straighten metal as close as possible
- sand the surface w/ 80 grit to bare unrusted metal
- Apply bondo so that extends well beyond repair
- Sand the bondo flat with a long board sander
- If surface is still not flat knock down high spots and fill low spots w/ more bondo and sand again
- Prime repair area
- Sand primer and painted surface w/ 220 or finer paper
- Top coat with paint
1954 GMC 1/2-ton Longbed
1971 Pontiac LeMans Sport
| | |
|
|
| |
