The Stovebolt Site Forums The Shop Area Engine Shop Manifolds for 261 in 2-ton

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (KEVINSKI, Mike Roache, Otto Skorzeny), 86 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,156

Posts1,056,870

Members48,456

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Manifolds for 261 in 2-ton Maybellene #1170406 06/20/2016 11:40 AM
Joined: Sep 2012 Posts: 222 SE Wis D DaveV 'Bolter
DaveV 'Bolter D Joined: Sep 2012 Posts: 222 SE Wis	Clarke, When I changed my manifolds to a modified split exhaust I found that there is a difference in heights of the intake manifold where the carb mounts. The 261 has a taller larger chamber above the heat riser. DaveV

Entire Thread
Subject	Posted By	Posted
Manifolds for 261 in 2-ton	Carolina Clive	06/11/2016 6:15 PM
Re: Manifolds for 261 in 2-ton	Maybellene	06/12/2016 2:29 AM
Re: Manifolds for 261 in 2-ton	MtneerMike	06/12/2016 2:29 AM
Re: Manifolds for 261 in 2-ton	DaveV	06/12/2016 1:32 PM
Re: Manifolds for 261 in 2-ton	Carolina Clive	06/18/2016 4:43 PM
Re: Manifolds for 261 in 2-ton	DaveV	06/19/2016 2:20 PM
Re: Manifolds for 261 in 2-ton	Maybellene	06/19/2016 3:50 PM
Re: Manifolds for 261 in 2-ton	DaveV	06/20/2016 11:40 AM
Re: Manifolds for 261 in 2-ton	Jim Sears	06/21/2016 5:13 AM
Re: Manifolds for 261 in 2-ton	Carolina Clive	06/22/2016 3:00 PM
Re: Manifolds for 261 in 2-ton	Carolina Clive	06/22/2016 3:04 PM
Re: Manifolds for 261 in 2-ton	tclederman	06/22/2016 3:05 PM
Re: Manifolds for 261 in 2-ton	Wrenchbender Ret.	06/23/2016 7:54 PM
Re: Manifolds for 261 in 2-ton	Maybellene	06/23/2016 8:29 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard