The Stovebolt Site Forums The Shop Area Engine Shop Removing the manifolds. Am I opening a can of worms?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (walter74, Lightholder's Dad, Millenimech, Wayne67vert, 1955 1 Series, 1 invisible), 158 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,209

Posts1,057,462

Members48,471

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Removing the manifolds. Am I opening a can of worms? TK421 #1165729 05/17/2016 5:45 AM
Joined: Aug 2005 Posts: 442 fort worth texas B bluedot38 'Bolter
bluedot38 'Bolter B Joined: Aug 2005 Posts: 442 fort worth texas	I used the Kroil too, and heated the bolts with a torch, and also shocked the bolts with a hammer. It took some time and patience over about 90 minutes. Was able to get the bolts out in one piece. Mike 1950 Chevy 1/2-ton

Entire Thread
Subject	Posted By	Posted
Removing the manifolds. Am I opening a can of worms?	TK421	05/16/2016 1:48 AM
Re: Removing the manifolds. Am I opening a can of worms?	tclederman	05/16/2016 2:00 AM
Re: Removing the manifolds. Am I opening a can of worms?	TK421	05/16/2016 2:13 AM
Re: Removing the manifolds. Am I opening a can of worms?	Deve	05/16/2016 2:06 AM
Re: Removing the manifolds. Am I opening a can of worms?	52Carl	05/16/2016 2:24 AM
Re: Removing the manifolds. Am I opening a can of worms?	tclederman	05/16/2016 3:02 AM
Re: Removing the manifolds. Am I opening a can of worms?	TK421	05/16/2016 3:43 PM
Re: Removing the manifolds. Am I opening a can of worms?	52Carl	05/17/2016 2:53 AM
Re: Removing the manifolds. Am I opening a can of worms?	Joe H	05/16/2016 3:14 PM
Re: Removing the manifolds. Am I opening a can of worms?	Maybellene	05/17/2016 5:03 AM
Re: Removing the manifolds. Am I opening a can of worms?	bluedot38	05/17/2016 5:45 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard