Awesome. Exact picture I was looking for. Everything inside the case appeared to be good and worked correctly. Was some wear on the 2nd and 3rd Shifter Fork, but we built (welded) that up and filed it back down. Removed the Rear Bearing Support, and that's when I found the Speedometer Drive Gear Spacer, the Speedometer Drive Gear, and the Universal Joint Spacer, just laying down in there, not ON the output shaft, but next to it. I know they go ON the output (main) shaft, I just didn't know in what order. Do now though.
Thank you, thank you.
Mike (Kade's pawpaw)
