| |
Click on image for the lowdown. 
====
| | |
2 members (55shaker, Peggy M),
78
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,073 Posts1,055,908 Members48,429 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | I was putting my 1940 216 together on the stand and I wanted to set the valve clearance. Of course I didn't have the flywheel on so I used the position of the lifters to deduce the proper spot for TDC. I noticed that there is a hole in my balancer just inboard of the pulley and it was at the very bottom at the time. I am wondering if that hole is there for reference. | | |
|
|
| |
