Getting ready for the spring to get here. pulled the tranny & transfer case the other day. I hate oil leaks. After getting them on the bench & taking apart several of the seals & gaskets had failed. After a trip to the parts store yesterday, today will be reassemble day. Also the throw out bearing was shot(cheap bearings any more). Hope to have it back together this weekend. Sure makes it nice having a car lift & high lift transmission jack, Don't miss the days of crawling around the cold floor. Oh I also removed the bed wood & sanded them down. I put 6 coats of urethane on them, way better appearance then before. I also polished the stainless runners that hold the bed wood into place. I post pictures on Flicker account. Later fellow Bolters
