A short story:
Found the project on Craigslist in Tampa. The seller had already installed the sbc,AT/8.8"/4.11/trac-loc rear end in the 2000 Ford Ranger Edge chassis- which came with power rack and pinion steering,4 wheel disc brakes, and torsion bar front suspension. He had also shortened the chassis about 10''s. I had to finish that rear axle modification by 'C' cutting/reinforcing the frame, installing a fuel cell, plumbing the brakes, modifying the PS, and on and on. I did all the paint and body work and sprayed it with a low gloss single stage Urethane (mint green and Wimbleton white. Installed a cut down seat out of an S10, an altered '55 BelAir dash, and Weld wheels, w/diamond plate fire wall, bed, and tail gate.
Last edited by burrpenick; 01/06/2016 7:33 PM.
