| |
Click on image for the lowdown. 
====
| | |
2 members (Rusty Rod, porsche),
64
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,357 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2013 Posts: 43 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2013 Posts: 43 | I am in the process of installing an Okie bushing in the torque tube of my 53 Chevy half ton. I removed the original bushing which went fine but I have concerns about the Okie.I cleaned and lubed the pilot shaft and started driving the Okie in, it is very tight which was expected but now I really don't see it going all the way flush with tube. The last 1 1/2 inch or so of the Okie is a slightly larger diameter. Anyone else have this problem? Okie came from Jim Carter. Thanks. | | |
|
|
| |
