The windshield stainless is easily pulled out after unscrewing the center moulding, which covers it in the center. to remove that, unscrew the rear view mirror and take out the 4 screws from inside the cab. then pull the center vertical moulding off. You can then gently pry up the ends of the stainless surround moulding and pull it out. To reinstall, put the glass into the rubber and then put the stainless in the rubber before installing in the cab. The door stainless is removed after taking ou the window glass and glass channel. This is covered tn the shop manual and i don't remember how I did it.
unbroke
