The Stovebolt Site Forums The Shop Area Paint and Body Shop sandblasting: epoxy primer or zero-rust

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (Rnl364, Oswald, Cosmo), 104 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,064

Posts1,055,860

Members48,428

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: sandblasting: epoxy primer or zero-rust #113392 03/05/2004 8:43 PM
Joined: Sep 2002 Posts: 59 Vancouver,WA G GoCougs Wrench Fetcher
GoCougs Wrench Fetcher G Joined: Sep 2002 Posts: 59 Vancouver,WA	Do you recommend using ZR with a paint brush or the rattle can? I'm going to start painting my frame this weekend and have both. Was thinking of brushing big open spaces and hard to reach places using the rattle can. Any problems with this theory?

Entire Thread
Subject	Posted By	Posted
sandblasting: epoxy primer or zero-rust	SEA DOG	06/04/2003 5:56 PM
Re: sandblasting: epoxy primer or zero-rust	Bruce Palmer	06/05/2003 12:19 AM
Re: sandblasting: epoxy primer or zero-rust	SEA DOG	06/05/2003 3:47 PM
Re: sandblasting: epoxy primer or zero-rust	praisethelowered	03/04/2004 5:14 AM
Re: sandblasting: epoxy primer or zero-rust	Bruce Palmer	03/04/2004 6:14 AM
Re: sandblasting: epoxy primer or zero-rust	Tony M	03/04/2004 2:32 PM
Re: sandblasting: epoxy primer or zero-rust	Bruce Palmer	03/04/2004 4:19 PM
Re: sandblasting: epoxy primer or zero-rust	Grapevine Bob	03/04/2004 11:31 PM
Re: sandblasting: epoxy primer or zero-rust	GoCougs	03/05/2004 8:43 PM
Re: sandblasting: epoxy primer or zero-rust	Bruce Palmer	03/05/2004 9:25 PM
Re: sandblasting: epoxy primer or zero-rust	Tony M	03/05/2004 10:10 PM
Re: sandblasting: epoxy primer or zero-rust	In2deep	03/09/2004 5:28 PM
Re: sandblasting: epoxy primer or zero-rust	Chazwel	03/19/2004 8:56 PM
Re: sandblasting: epoxy primer or zero-rust	Bruce Palmer	03/19/2004 10:32 PM

Moderated by klhansen

Hop To

Link Copied to Clipboard