| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,006 Posts1,055,272 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2014 Posts: 924 Shop Shark | | Shop Shark Joined: Apr 2014 Posts: 924 | A worn out drive gear, drive gear bushing, and/or starter return spring can cause 'binds.'
You'll just have to disconnect the battery & fiddle with it some so you can observe it happening. Make sure the starter is fully seated & torqued to the bellhousing.
"Not up as high as normal" means it didn't fully retract/return.
Brad
Wrench Fetcher, PhD | | |
|
|
| |
