so my '53 has very sloppy steering going straight down the road. up to 90 degrees to get it to keep going straight. seems tight on right turns but very sloppy going left. all steering components are very old but seem to be in good working order. I need some suggestions please.

here is what I found out after my disc brake swap....

1) loose/worn king pin on passenger side, and less worn on drivers side.

2) steering components appear tight with no slop.

3)when on the ground and stationary, the steering wheel is good and tight in both directions. just sloppy when driving. the faster I go the worse it gets!

any advice would be greatly appreciated.

Loving my new (old) '53 3100 5 window!