So the spark advance must be connectet to the carb.
There is a port at the back (passenger) side.
That is right where you said. I removed the plug and will buy a fitting for the advance.
Take the brass elbow and connect it to your wipers.
Can I use 1/4" rubber tubing and press on fittings? There are no connections, lines or tubing of any kind at this point. What do you recommend?
If you have a road draft tube at the crank case, that`s good to go.
Not sure what this is? I do have an oil cap, that allows positive ventilation. Would I just plug the hole in the valve cover where the fumes are being sucked out? Hotrod and Stovebolt thanks so much for the help.
