There is a member here "carbking". I did not know of him or his business. I had bought a rebuild kit from my FLAPS. When taking the carb apart I saw a small bent spring steel piece left on the rebuilding tray.

There was so much dirt on the carb that when I took off the idle speed screw it was not seen by me. Normally that part would of been seen and would of came of as the screw was removed.

Any way he responded to my thread and he knew what that part was by my description and measurements and told me what it was and I was not even a customer.

If tclederman recommends someone then they must be good too. So contact both and see.