Installed the back bumper everything went OK. Then I started on the front, new brackets, new bumper. One bracket, RH, stood out from the fender 7 inches and the other, LH, 8 inches the RH side was 17 1/2 of the floor and the LH was 18 1/4. I can get the 2 outb. bolts in the holes but the inb. ones are off 1 to 1 1/2 inches. Measuring the holes distance on each bracket they are the same, the center holes, C/L on the bumper measure 25 inches. Do I need a BFH to get things to go where they are needed? When everything is mounted what should the outb. bumper tips be from the fenders and C/L to the ground? 53 3100 root
