| |
Click on image for the lowdown. 
====
| | |
7 members (chevy51truck, Gdads51, dt235sd, Otto Skorzeny, JW51, MickeyP, LAROKE),
62
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,698 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2001 Posts: 5,337 'Bolter | | 'Bolter Joined: Jan 2001 Posts: 5,337 | There is a slot on each end of the synchro drum that allows access to the snap ring on the inboard end of the cones/rings. I have a pair of small needle nose pliers that I have ground flats on the out side of the tips. These fit in the slot to expand the snap ring. Putting them back in tests your patience. You will need to expand the snap ring and keep it up against the inboard edge of the brass ring while installing the cone. Not easy but doable. Here is a link to the shop manual description.
See the USA in your vintage Chevrolet! My Blog | | |
|
|
| |
