The Stovebolt Site Forums The Shop Area Paint and Body Shop drilling through fresh powder coat

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (46 Texaco, sron48), 146 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,119

Posts1,056,313

Members48,439

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: drilling through fresh powder coat Bill Marlow #1100360 05/01/2015 11:46 AM
Joined: Jul 2011 Posts: 785 Leonardtown, MD M MPandC 'Bolter
MPandC 'Bolter M Joined: Jul 2011 Posts: 785 Leonardtown, MD	May also help to drill from the inside/back side. By the time the cutter gets through the panel it will have warmed up the temp a bit where there it less likely for chipping to occur. Robert MP&C Shop Projects-Metalshaping Tutorials

Entire Thread
Subject	Posted By	Posted
drilling through fresh powder coat	Bill Marlow	04/30/2015 10:47 AM
Re: drilling through fresh powder coat	MPandC	04/30/2015 11:42 AM
Re: drilling through fresh powder coat	Bill Marlow	04/30/2015 12:47 PM
Re: drilling through fresh powder coat	jockbolter50	04/30/2015 1:47 PM
Re: drilling through fresh powder coat	Deve	04/30/2015 9:09 PM
Re: drilling through fresh powder coat	Achipmunk	04/30/2015 10:08 PM
Re: drilling through fresh powder coat	Deve	05/01/2015 12:02 AM
Re: drilling through fresh powder coat	DennisM	05/01/2015 12:07 AM
Re: drilling through fresh powder coat	46Sparky	05/01/2015 1:49 AM
Re: drilling through fresh powder coat	MPandC	05/01/2015 11:46 AM
Re: drilling through fresh powder coat	Bill Marlow	05/01/2015 2:41 PM
Re: drilling through fresh powder coat	Hotrod Lincoln	05/01/2015 3:41 PM
Re: drilling through fresh powder coat	59 Apache Dlx	05/02/2015 5:24 AM
Re: drilling through fresh powder coat	Peter_H	05/03/2015 3:17 AM

Moderated by klhansen

Hop To

Link Copied to Clipboard