The 1958 336 engine was a reduced-bore version of the 370 automotive engine with a 3 7/8" bore. The 370 has a 4 1/16" bore. That would be a 3/16" overbore, or 0.1875" If pistons are hard to find it might be possible to bore it to accept the bigger pistons, assuming the same 270 block casting was used. That's a very large overbore, but it might work if the same casting was used for the smaller engine.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!