| |
Click on image for the lowdown. 
====
| | |
10 members (DaveV, Joe H, Oswald, Phak1, GA Boy, 55shaker, Jay R, 32vsnake, Goach2, Ridgeback),
92
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,198 Posts1,057,270 Members48,466 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2008 Posts: 872 Shop Shark | | Shop Shark Joined: Sep 2008 Posts: 872 | I have the same welder.. works well on sheet metal but does not have the amps or duty cycle to much more.
My little prop tip.. if using C2 mix you will get great welds at 10psi on the gauge UNLESS there is a breeze. Even with a shop fan I set it at 10psi and never had any porosity issues.
| | |
|
|
| |
