2" Carriage Bolts

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (JoergK., Guitplayer, Phak1, Bill Trotter, Southerntruck, Hotrod Lincoln), 100 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,195

Posts1,057,376

Members48,469

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts David Bush #1067417 11/09/2014 11:43 PM
Joined: Jun 2012 Posts: 1,749 Ut S Steve_H 'Bolter
Steve_H 'Bolter S Joined: Jun 2012 Posts: 1,749 Ut	Only thing I can think is putting that much pressure on the shackles would be a bad bushing at the fixed end. It might allow enough movement to shift the shackle end. If that is not the issue then I would look close at the "U" bolts for sure. Steve H

Entire Thread
Subject	Posted By	Posted
Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	David Bush	10/31/2014 9:12 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	bartamos	10/31/2014 9:32 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	Sput	10/31/2014 9:38 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	bartamos	10/31/2014 9:49 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	crenwelge	10/31/2014 9:51 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	bartamos	11/01/2014 8:25 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	Chev4t6	11/02/2014 1:49 AM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	52Carl	11/02/2014 2:54 AM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	don stocker	11/02/2014 2:07 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	David Bush	11/02/2014 2:21 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	don stocker	11/02/2014 3:34 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	bartamos	11/02/2014 5:47 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	David Bush	11/05/2014 2:04 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	johnhull	11/05/2014 3:45 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	bartamos	11/05/2014 5:20 PM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	David Bush	11/06/2014 4:01 AM
Re: Grade 8 or Grade 5 3/8 x 31/2" Carriage Bolts	Steve_H	11/09/2014 11:43 PM

Moderated by Dusty53, SWEET

Hop To

Link Copied to Clipboard