I also installed a new gasket in mine and it leaks at the bottom 2 most outward corners. I have yet to do it but word on the street from all the car shows i went to is to have someone pull back the gasket lip over the cab bending it up and squeeze in some urethane all the way around (use generously. Then after that have someone lift up on the lip that overlaps the glass and follow with the thin viscosity window silicone. Let it ooze out and when dry cut with razor and pull off the rest. Lots of guys with the trucks are doing this.
Last edited by wolffcub; 11/04/2014 9:53 PM.
