| |
Click on image for the lowdown. 
====
| | |
0 members (),
102
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,048 Posts1,055,540 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2013 Posts: 74 Shop Shark | | Shop Shark Joined: Apr 2013 Posts: 74 | I'm putting the gas gauge cluster into my 54 1/2 ton and wonder if the trim piece should fit flush to the dash opening sticking out about an inch? I'm having trouble getting a tight fit.
Another question while I'm here - I bought a new 12v gas gauge for the cluster. It came with:
1. Cardboard strip between posts
2. two regular washers on each post
3. one locking washer on each post
4. two nuts on each post
Is this the order in which they are installed?
Do they all go on the post side of the gauge housing?
Where among these nuts and washers on each post is the sender an power connection placed? | | |
|
|
| |
