| |
Click on image for the lowdown. 
====
| | |
1 members (Wooley),
105
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,151 Posts1,056,997 Members48,460 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2009 Posts: 127 'Bolter | | 'Bolter Joined: Oct 2009 Posts: 127 | Here's one for guys who have experience with replacing a pinion or the Patricks 3.55 conversion:
How much play is acceptable between the pinion splined shaft and the driveshaft?
The manual shows using a big old puller for removing and replacing the pinion shaft. So must the splines themselves always be a tight fit? Or will the pin hold the whole setup together?
Mine had a broken pin, and the splines are a loose fit.
52 3100 project
54 3100 / 3112 ice cream truck, next project
| | |
|
|
| |
