| |
Click on image for the lowdown. 
====
| | |
8 members (55shaker, Otto Skorzeny, JW51, 68ironhead, baldeagle, Ol'55, 3B, 1 invisible),
68
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,039 Posts1,055,473 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2000 Posts: 579 'Bolter | | 'Bolter Joined: Jul 2000 Posts: 579 | Lonnie, if these braces are flattened at one end with two holes to receive bolts and threaded at the other end, they are the diagonal fender braces located in the engine compartment. The flattened ends are connected to the firewall (near the center) with 5/16"-18 x 5/8" cap screws into captured hex nuts. At the fender ends, the threaded rods are connected to v-shaped brackets using 3/8"-16 hex nuts and washers (see pic below) [img] http://www.laroke.com/larryk4674/2002/bb122202bt.jpg[/img] | | |
|
|
| |
