Originally Posted by Hotrod Lincoln
A pressure washer is a good idea if you've got a place to drain the crud without getting the enviro-nazis on your case. I've been known to sneak into the friendly local coin car wash late at night for such projects and use their engine degreaser option for that kind of stuff. Since you're in Commiefornia, that might be a problem. Once the pan is clean, aiming the spray tubes is simple- - - -scribe an "X" on the side of the oil pan directly across from each nozzle, attach a water hose to the supply tube, and bend the nozzle up, down, or sideways until the stream of water hits the middle of the X. Rinse and repeat for all six nozzles!
Jerry

And here I thought you had to have a special tool for that..... Good tip Hotrod Lincoln.
John