| |
Click on image for the lowdown. 
====
| | |
0 members (),
35
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,014 Posts1,055,327 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2011 Posts: 2,951 'Bolter | | 'Bolter Joined: Sep 2011 Posts: 2,951 | Shoundog, If you plan to use a T5 from an S10, I think I can help you avoid buying an adapter plate. The 14 spline S10 input shaft can usually be exchanged with a BRAND NEW 10 spline T5 input shaft made for a Jeep T5. The new T5 shaft would cost about $75 total. The swap is not difficult but I'm not sure how comfortable you would be doing it. I also sent you a PM. This article in the Stovebolt TECH TIPS section probably has the info you need to keep the foot starter, but I have not read through it. Here's another article. And one more article.
Last edited by Lugnutz; 05/19/2014 6:46 PM.
| | |
|
|
| |
